7 Quick Tips About Concrete Spalling in 2023

Concrete spalling is a problem that can occur in any concrete structure. It is the result of water and salt penetration, which causes the surface of the concrete to flake and chip away. This can lead to serious structural problems, so it’s important to address any signs of spalling as soon as possible. In this blog post, we will discuss 7 quick tips for preventing and repairing concrete spalling.


The Causes of Spalling and How to Prevent It

Spalls may emerge as a result of incorrectly constructed concrete joints, exposed rebar that has started to rust due to humidity and water, or both. The concrete deteriorates further as a result of spalling caused by the concrete’s expansion due to variations in the weather. Applying a good water sealant to the final surface to stop water from penetrating the concrete is one method for preventing concrete from spalling.

If the concrete is handled correctly and the proper pouring procedures are utilized, spalls can also be prevented. For example, joints should be placed in the proper places and at the proper distances, and there should be enough concrete to cover (embed) the rebar. Always pay close attention to exposed concrete’s edges and corners to ensure that there is a suitable amount of concrete protection, as required by the structural engineer or the ACI. The concrete mix is another important consideration since too much water might cause spalling.


7 Tips To Prevent Spalling

If you want to prevent spalling in your concrete structures, there are a number of things that you can do. Some of the most effective tips include:

  • Regular inspection: Be sure to inspect your concrete structures regularly for any signs of spalling, such as cracks or flaking. This will help you catch the problem early and take action before it gets worse.

  • Minimize water exposure: Try to minimize the amount of water that comes into contact with your concrete structures, whether through rain or flooding. This can be done by installing proper drainage systems, using waterproof materials for surfaces like driveways and sidewalks, and sealing any leaks in pipes or other plumbing components.
Concord Remodel Stamped Concrete Project 1
  • Use protective coatings: Applying a good protective coating on the surface of your concrete structures is another effective way to prevent spalling from occurring. These coatings will help keep moisture out while also protecting against other environmental factors like UV rays, chemicals, and abrasion.

  • Repair any damage immediately: If you notice any signs of spalling on your concrete structures, it’s important to address the problem right away. A professional repair service can help determine what caused the issue and then take steps to fix it quickly and effectively.

  • Regular maintenance: Maintaining your concrete structures through things like sweeping and pressure washing can also help reduce the risk of spalling. This will prevent moisture from being trapped on the surface of the concrete and keep dirt and debris from building up over time.

  • Use reinforcements: Finally, consider using reinforcements when constructing your concrete structures in order to provide added support against damage caused by water or other environmental factors. This might involve using materials like fiberglass or epoxy to strengthen existing concrete joints, or adding extra layers of concrete in areas that are particularly vulnerable to spalling.

So, what can you do to prevent spalling? Luckily, there are several things that homeowners and property managers can do to minimize the chances of concrete spalling. For example, always keeping surfaces clean and free of debris will help; additionally, using a sealant or coating on the surface of concrete can provide an extra layer of protection. If you’re dealing with spalling damage, it’s important to repair it as soon as possible – call Spaulding Concrete for more information about their restoration services. In short: keep your concrete clean and protected, and don’t wait until it’s too late!

Are You Looking for a Company to Build a Foundation for Your New Home? 

Spaulding Concrete has been the SF Bay Area’s top foundation builder for over 30 years.  We’re here to fix your home’s foundation, no matter what problem may exist. We have the specialized equipment, services, and professional experience that you need to make permanent improvements to your building’s foundation. To get you started on the right foot, we would be happy to give you a free quote for the repair of the foundation. When you reach out by phone or email we will have one of our foundation experts answer any questions you have and explain how we can restore integrity and structural stability to your home or company building permanently. Successful concrete projects require careful planning and thorough preparation. Spaulding Concrete reviews the site and designs to ensure that the concrete and base structure follows the criteria for the planned use and that the layout and finishes are suitable for the project. The qualified concrete experts at Spaulding Concrete will be on schedule, on budget, and meet or exceed standards through careful planning, professional execution, and strict quality control.

To schedule your free quote, contact us today! We are proud to serve Orinda, Lafayette, Moraga, Pleasant Hill, Concord, Martinez, Pittsburg, Antioch, Brentwood, and the surrounding areas.